Gear and Go Deluxe Double Swag
£350.00
Gear and Go Deluxe Double Swag
Description
Gear and Go Deluxe Double Swag
The swag boasts a massive sleeping area, certainly one of the largest available in the UK market at 2100mm Length, 1550mm Width and almost 1000mm High. The superbly comfortable mattress is an open cell foam mattress that is 50mm thick and even comfy on stony ground.
These Swags are superbly easy to use with?freestanding quick attach pole loops, making it fast to set up and take down.??These tents are versatile and can be used for ?off-roading, fishing,?hunting and weekend camping trips.
The outer fabric is?400 gsm Ripstop polycotton canvas?and a heavy duty PVC bucket floor offers?excellent waterproof properties in ANY conditions!
The end poles are 10.2mm diameter for extra strength and the centre / spreader pole is a tough telescopic alloy design.??We have listened to a great deal of feedback with regards to sagging in the extra large?swag,?and have added an additional centre support to prevent this.
The Swag has a large openings on both sides of the tent, with outer door and inner mesh anti-bug lining, allowing for plenty of room to get in and out without struggling through?a small doorway. There are large storm flaps and vents located at the top and bottom, giving protection and ventilation whatever the weather.
We are really excited to launch these excellent quality swags into the UK.??They were demonstrated at the Indoor 4×4 Expo, held in February, where we received lots of interest.
The Gear & Go Team have been testing the prototype as often as we could?throughout this year and all of us found it comfortable and easy to use.
Weight – 16 KG
Boxed Dimensions – 850mm x?350mm x 330mm
In Bag Dimensions – 1500mm x 400mm x 400mm
SWAG SEASONING INSTRUCTIONS
STEP 1
- Set up your swag as if you were going on a camping trip
- Remove mattress
- Ensure all windows and doors are closed
STEP 2
- Soak the product with a garden hose.? The canvas needs to be saturated so please allow at least 5 minutes of forceful water to achieve this.
- To help the water penetrate the canvas,? you could use a clean sponge and sponge the water onto the canvas.
- Once the canvas is totally saturated, leave it in the sun?(dry place) to fully dry.
STEP 3 and 4
- To ensure that the canvas is fully waterproof, repeat step 2 two more times.
NOTE
- This process causes the canvas to contract and expand multiple times, subsequently the canvas would have??closed up??any holes caused by the stitching process resulting in the product being more water resistant.
SETTING UP TIPS
- There are 3 sets of lock-in poles, the 2 long ones for the outside ends and the shorter one for the inside middle support.
- As the swag is new, and the stitching still tight, the easiest way to insert the middle support, is to sit inside the swag and pull the tab towards the mattress, creating and angle.? That makes it a little bit easier to insert the support pole.? This holder will stretch with time which will make it easier.
Additional information
| Weight | 15 kg |
|---|---|
| Dimensions | 70 × 50 × 5 cm |
| Vehicle | Universal Fit |
